Product ID:LATAPOXY SP-100, PART B
MSDS Date:09/10/1987
FSC:8030
NIIN:00N086991
Kit Part:Y
MSDS Number: CHFWJ

LATICRETE INTERNATIONAL INC

1 LATICRETE PK NORTH
WOODBRIDGE, CT 06525
US

Emergency Phone: 203-393-0010

Info Phone: 203-393-0010

Preparer: WR WIMIRA

Cage: 56877

LATICRETE INTERNATIONAL INC

BETHANY, CT 06524-3423 US

Telephone: 203-393-0010

Cage: 56877

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (LIQUID EPOXY RESIN)

CAS: 25068-38-6

RTECS: SL6475000

OSHA PEL N/K

ACGIH TLV: N/K

ALKYL GLYCIDYL ETHER; (REACTIVE DILUENT)

CAS: 68081-84-5

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50 (ORAL RAT): > 2000 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: NOT CONSIDERED A
PROBLEM UNLESS HEATED TO A HIGH TEMPERATURE. EYES: MINOR TRANSIENT
IRRITATION WITH NO CORNEAL INJURY LIKELY. SKIN CONTACT: MAY BE A
SENSITIZER. SKIN ABSORPTION: NOT LIKELY TO BE ABSORBED THROUGH
SKIN IN TOXIC AMOUNTS. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IRRIGATION OF THE EYE IMMEDIATELY WITH WATER FOR AT
LEAST 15 MINUTES IF GOOD SAFETY PRACTICE. CONSULT MEDICAL
PERSONNEL. SKIN: WASH OFF IN FLOWING WATER OR SHOWER. WASH CLOTHING
BEFORE REUSE. IN HALATION: REMOVE TO FRESH AIR IF EFFECTS OCCUR.
CONSULT MEDICAL PERSONNEL. INGESTION: LOW IN TOXICITY. INDUCE
VOMITING IF LARGE AMOUNTS ARE INGESTED.

Flash Point Method:COC
Flash Point:>450F,>232C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:NONE. WEAR NIOSH APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:SOAK UP IN ABSORBENT MATERIAL OR SCRAPE UP.
RESIDUAL CAN BE REMOVED WITH HOT WATER AND A NONIONIC SURFACTANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE NORMALLY NEEDED. USE NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD ROOM VENTILATION USUALLY ADEQUATE FOR MOST OPERATIONS.
Protective Gloves:RUBBER OR POLYETHYLENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . CLEAN, BODY-COVERING CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS TO AVOID (POLYM): W/CONSIDERABLE HEAT BUILD-UP.

Spec Gravity:1.12
Solubility in Water:NONE
Appearance and Odor:VISCOUS, AMBER LIQUID

Stability Indicator/Materials to Avoid:YES
BASE.
Stability Condition to Avoid:EXCESSIVE HEATING OVER LONG PERIODS OF
TIME DEGRADES THE RESIN.
Hazardous Decomposition Products:NONE UNDER NORMAL CONDITIONS.
Conditions to Avoid Polymerization:WILL NOT OCCUR BY ITSELF, BUT MASSES
OF >1 LB OF PROD PLUS AN ALIPHATIC AMINE WILL CAUSE IRREVERSIBLE
POLYM (SUP DAT)

Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN AN
APPROVED LANDFILL. DISPOSE OF ALL WASTES IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.